U - Universal Joist Hanger
Part of the world's first backer and filler free solution. The U hanger has the ability to transfer loads without the need for either web stiffeners or backer blacks for I-Joist or plywood gussets for Open Web joists.

U Datasheet

HI - High Load I-Joist Hanger
Part of the world's first backer and filler free solution. The HI hanger has the ability to transfer loads without the need for either web stiffeners or backer blocks and is extremely quick and simple to install.

HI Datasheet

HW - High Load Open Web Hanger
The HW hanger has all the benefits of the U hanger for Open Web joists with increased load carrying capacity for 2-ply Open Web connections.

HW Datasheet

VHW - Very High Load Open Web Hanger
The VHW Hanger is used in high load situations for up to 10.69kN.

VHW Datasheet

LUI - Light Universal I-Joist Hanger
Part of the world's first backer and filler free solution. The LUI hanger is a light duty I-Joist connector based on the U hanger and is the ideal hanger for small trimming area. Bearing length is 50mm.

LUI Datasheet

FFI - Face Fix I-Joist Hanger
The FFI hanger is a multi-purpose utility connector for any joist to joist or joist to trimmer application. The FFI is designed to transfer its safe working load/characteristic capacity without the need for web stiffeners. However I-Joist manufacturer may require web stiffeners.

FFI Datasheet

IFI - Internal Flange I-Joist Hanger
The IFI hanger can accommodate widths of 100mm and below, and can be used at the corner locations of floor cassettes, post to beam connections and in cantilevered or balcony positions.

IFI Datasheet

TFI - Top Fix I-Joist Hanger
The TFI hanger offers one standard design that is quick and simple to install. The TFI hanger combines a cost effective connector with optimum performance.

TFI Datasheet

VS - Variable Skewed Hanger

Part of the world's first backer and filler free solution. The VS hanger offers a superior level of performance to traditional joist hangers. The unique construction provides a variable a variable skewed angle of 30º and 90º.

VS Datasheet

45L/R - Face Fixed 45º Hanger

The 45L/R timber to timber connector offers a pre-skewed 45º left of right hand orientation.

45L/R Datasheet

FTHI - Flexible Timber Hanger

The FTHI is an adaptable concept in top fix support where higher loads need to be transferred safely and economically.

FTHI

Datasheet

ACE - Adjustable Connector Eaves

The ACE has the flexibility to be adjusted on-site for angles between 15º and 45º and eliminates the need to use bevelled wallplates.

ACE Datasheet

VRC - Variable Ridge Connector

The VRC connects rafters to ridge beams. Its innovative design allows it to accommodate slopes between -35º and  -45º and skews between 30º and 90º . It provides a positive load transfer.

VRC Datasheet

KMI - Mini Hanger
The KMI hanger offers a compact, economical connector. The innovative streng.thening points incorporated in the design, transfer loading directly to the fixings, ensuring enhanced performance whilst minimising deflection.

KMI Datasheet

Connection To Steelwork

Connection To Steelwork Datasheet